11.0-20.0 ghz gaas mmic packaged driver amplifier page 1 of 6 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 08-feb-07 cmm1118-qt 20 db gain 14 dbm p1db 3x3 qfn package single power supply 5-7 v, 90 ma self bias on-chip esd protection features electrical characteristics (t=25oc) circuit description mimix broadband?s 3 stage 11.0 to 20.0 ghz driver amplifier is packaged in surface mount 3x3 qfn package. the device is a self-biased, single supply design with 20 db gain and 14 dbm p1db. this mmic uses mimix broadband?s 0.25um optical phemt process. supply voltage rf input power storage temperature (tstg) junction temperature operating temperature +8 v +10 dbm -55 oc to +125 oc 175 oc -40 oc to +85oc absolute maximum ratings frequency range gain gain delta output p1db output ip3 input return loss current supply voltage parameter typical parameters frequency gain ip return loss op return loss p1db oip3 parameter 12 21.5 -10.3 -8 12.3 23.3 14 20.4 -11.2 -18.8 12.3 22.2 16 19.6 -10.6 -11 15.5 23 18 19.2 -17 -7.5 14.7 23 typical 20 20 -5.5 -8 16 22.2 units ghz db db dbm dbm db ma v min. 11 17 12 typ. 19 2 13 22 -8 5 max. 18 100 7 min. 17.7 17 12 typ. 19 2 13 22 -8 5 max. 19.7 3 100 7 cmm1118-qt-0xxx cmm1118-qt-bxxx
page 2 of 6 driver amplifier measurements 11.0-20.0 ghz gaas mmic packaged driver amplifier gain 0 5 10 15 20 25 10 12 14 16 18 20 frequency (ghz) gain (db) 5volt 6volt 7volt input return loss -30 -25 -20 -15 -10 -5 0 10 12 14 16 18 20 frequency (ghz) (db) 5volt 6volt 7volt output return loss -30 -25 -20 -15 -10 -5 0 10 12 14 16 18 20 frequency (ghz) (db) 5volt 6volt 7volt p1db 0 2 4 6 8 10 12 14 16 18 20 10 12 14 16 18 20 frequency (ghz) p1db (dbm) 5volts 6volts 7volts psat 0 2 4 6 8 10 12 14 16 18 20 10 12 14 16 18 20 frequency (ghz) psat (dbm) 5volts 6volts 7volts oip3 0 5 10 15 20 25 30 10 12 14 16 18 20 frequency (ghz) oip3 (dbm) 5volts 6volts 7volts cmm1118-qt mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 08-feb-07
page 3 of 6 driver amplifier measurements (cont.) 11.0-20.0 ghz gaas mmic packaged driver amplifier p1db 0 2 4 6 8 10 12 14 16 18 10 12 14 16 18 20 frequency (ghz) p1db (dbm) -40c 25c 80c psat 0 2 4 6 8 10 12 14 16 18 20 10 12 14 16 18 20 frequency (ghz) psat (dbm) -40c 25c 80c cmm1118-qt mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 08-feb-07
page 4 of 6 11.0-20.0 ghz gaas mmic packaged driver amplifier evaluation board layout package pin-out table c1 = 1000pf c2 = 1 f pin1 pin2 pin 3 pin4 pin5 pin6 pin7 pin8 pin9 pin10 pin11 pin12 pin1 3 pin14 pin15 pin16 g n d or n c rf input g n d or n c g n d or n c g n d or n c g n d or n c g n d or n c g n d or n c g n d or n c g n d or n c rf output g n d or n c v dd g n d or n c g n d or n c g n d cmm1118-qt mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 08-feb-07
page 5 of 6 11.0-20.0 ghz gaas mmic packaged driver amplifier package outline and assembly 0.65 1.00 a2 0 e e2 l d2 e k b d 0.16 0.20 1.50 0.20 3.00 bsc 0.26 0.36 1.65 1.80 0.50 - - 0.25 0.30 3.00 bsc nom 0.20 ref min a3 0.80 a max 0.90 1.00 1.50 1.65 1.80 a2 a d e 0.00-0.05 indicator pin 1 1. all dimensions are in mm note: 1.00 .005 package outline 0.30 .005 0.50 bsc recommended solder pad pitch and dimensions 1.40 .05 (4 sides) 2.00 .05 4.00 .05 a3 xxyy xxxx 1118g ordering information part number for ordering description cmm1118-qt-0g00 cmm1118-qt-0g0t matte tin finished rohs compliant 3x3 qfn in bulk quantity matte tin finished rohs compliant 3x3 qfn in tape and reel pb-cmm1118-0000 evaluation board cmm1118-qt mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 08-feb-07
page 6 of 6 11.0-20.0 ghz gaas mmic packaged driver amplifier handling and assembly information caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures: do not ingest. do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. life support policy - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. package attachment - this packaged product from mimix broadband is provided as a rugged surface mount package compatible with high volume solder installation. care should be taken not to apply heavy pressure to the top or base material to avoid package damage. vacuum tools or other suitable pick and place equipment may be used to pick and place this part. care should be taken to ensure that there are no voids or gaps in the solder connection so that good rf, dc and ground connections are maintained. voids or gaps can eventually lead not only to rf performance degradation, but reduced reliability and life of the product due to thermal stress. mimix lead-free rohs compliant program - mimix has an active program in place to meet customer and governmental requirements for eliminating lead (pb) and other environmentally hazardous materials from our products. all mimix rohs compliant components are form, fit and functional replacements for their non-rohs equivalents. lead plating of our rohs compliant parts is 100% matt tin (sn) over copper alloy and is backwards compatible with current standard snpb low-temperature reflow processes as well as higher temperature (260c reflow) ?pb free? processes. part numbering designator - for mimix/celeritek lead-free products, the letter ?g? will be used in the part number for matte tin finished rohscompliant components and ?l? will be used in the part number of nipdau finished rohs compliant components in the second position of the part number suffix, as shown below: example a: cxx1234-xx-0g00 = component bulk quantity matte tin finished rohscompliant parts example b: cxx1234-xx-0l0t = component in tape and reel nipdau finished rohs parts for those customers not making the change at this time, mimix/celeritek will maintain production of current configurations. for questions and comments e-mail: ourearth@mimixbroadband.com. cmm1118-qt mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 08-feb-07
|
